ETHERLINE® FIRE Cat.5e PH120 4x2x23/1 AWG
Ethernet cable; Fixed Installation; ETHERNET/IP; Cat.5e; F/FTP; Halogenfree; red
| Unit | Per Unit | Per MOQ |
|---|---|---|
| 100 | ₹1,422.94 | ₹142,294.00 |
| 300 | ₹1,245.08 | ₹373,524.00 |
| 500 | ₹1,102.78 | ₹551,390.00 |
Benefits
- Insulation integrity for up to 120 minutes under the effect of fire (classification PH120 according to DIN EN 50200). There is no risk of cable shorting during this time.
- Variant “Cat. 6“ also ensures functional retention of continuous data transmission for up to 120 minutes during exposure to fire (in accordance with DIN EN 50289-4-16).
- High-quality resistance to electromagnetic interference thanks to double screening.
- Halogen free product that does not produce corrosive acids or hazardous gases in the event of a fire.
- Low smoke density in the event of fire (according to DIN EN IEC 61034-2).
- Low corrosiveness of gases in the event of fire (according to DIN EN IEC 60754-2).
- For the transmission of analogue and digital signals in the frequency range up to 100 MHz (Cat. 5e) or up to 250 MHz (Cat. 6).
Applications
- Especially for data and signal transmission in areas at risk of fire with highly flammable materials.
- Variant “Cat. 6“ specifically for data and signal transmission in areas that are essential for the continuous functioning of a system in the event of a fire (emergency circuits).
- For use in building automation.
- For use in backbone network areas.
- For fixed installation (max. transmission distance 100 m).
Technical Attributes
General Information
Brand
ETHERLINE®
Product type
Ethernet cable
Weight
75 kg/km
Copper index
24.000 kg/km
Copper index (lb)
161.300 lb/10,000 ft
valid Fieldbus or Ethernet System
ETHERNET/IP
Electrical Characteristics
Nominal voltage
48 V AC rms according to IEC
Rated voltage core to core
50 V AC rms according to IEC
test voltage conductor/conductor
0.7 kV
Test voltage core/screening
0.7 kV
DC loop resistance at 20°C
134 Ω/km
Min. insulation resistance
2 GΩ*km
Nominal characteristic impedance
100 Ω
Possible data transmission rates
1000 Mbit/s
Signal propagation speed (nom.)
0.67 c
Product Design
Conductor number/size
4x2x23/1AWG
Cable dimension
4X2X23 AWG
Conductor cross-section (mm2)
0.25 mm²
Nominal cross section conductor (AWG)
23 AWG
Number of wires
1
Conductor material
Bare Copper
Including protective conductor
No
Number of cores
8
Number of pairs
4
Pair wrapping
Plastic tape
Stranding type
Twisted-pair
additional stranding element
Cross Separator
Wrapping over stranding
Special tape
Shielded
Yes
Type of overall screen
Copper tape
Abbreviation shielding
F/FTP
With armouring
No
With rodent protection
No
Min. diameter of core
0.9 mm
Nominal diameter of core
0.95 mm
Max. diameter of core
1.05 mm
Min. outer diameter
8.3 mm
Nominal outer diameter
8.6 mm
Max. outer diameter
8.9 mm
Shape of cable
Round
Core insulation base material
Polyethylene
Core insulation base material, shortname
PE
Core wrapping
Special tape
Base material outer sheath
Halogen-free compound
Cable insulation colour
red
Colour outer sheath RAL code
RAL 3000
Core identification
Colours
Product Characteristics
Application area
Fixed Installation
For continuous flexing
No
For torsional load
No
Windable
No
Minimum bending radius, fixed installation
15 x outer diameter
Minimum bending radius in mm, fixed installation
133.5 mm
Temperature, fixed installation
-20 °C to 70 °C
Min. installation temperature
-20 °C
Installation temperature max.
70 °C
Flame-retardant
Yes
Flame retardance according to
EN 50200
corrosiveness of combustion gases according to
IEC 60754-2
UV-resistant
No
Chemical resistant
Yes
Halogenfree
Yes
Zero halogen according to
IEC 60754-1
Oil-resistant
No
PWIS-free
Yes
LABS-free according to
VDMA 24364-B2-L
Low-adhesion sheath surface
Yes
Ethernet cable category
Cat.5e
Fast Connect (FC) cable
No
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
UL recognised
No
UL listed
No
cUR recognized
No
cUL listed
No
CSA certified
No
VDE certified
No
Tested for fire protection for railway vehicles
No
Ecolab certified
No
Documentation
-
Downloads
Further Links
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from ETHERLINE® FIRE
| Article number | Conductor number/size | Ethernet cable category | Nominal outer diameter | Copper index | Weight | Conductor number/size | Ethernet cable category | Nominal outer diameter | Copper index | Weight |
|---|---|---|---|---|---|---|---|---|---|---|
| 2170905 | 4x2x23/1AWG | Cat.5e | 8.6 mm | 24.000 kg/km | 75 kg/km | 4x2x23/1AWG | Cat.5e | 8.6 mm | 24.000 kg/km | 75 kg/km |
| 2170913 | 4x2x22/1AWG | Cat.6 | 10.6 mm | 48.000 kg/km | 139 kg/km | 4x2x22/1AWG | Cat.6 | 10.6 mm | 48.000 kg/km | 139 kg/km |
Why Choose Lapp ?
Why Choose LAPP as a Preferred Partner?
